The THERMOMASS Poured-in-place technology (PIP) produces highly energy efficient, load-bearing, insulated concrete walls. The patented fiber composite connectors and Dow insulation eliminate thermal bridges that are often found in other poured-in-place methods.

The THERMOMASS System allows for rapid construction and can use any forming system, with or without liners. The state-of-the-art technology reduces on-site construction time and the monolithic pour gives one step finished wall construction.

The THERMOMASS Building System is prepared by inserting the patented fiber composite connectors into pre-installed snap locks in the insulation. After the forms are set, concrete is poured on both sides of the insulation, which results in a finished interior and exterior concrete wall.

PIP construction with the THERMOMASS system offers fire resistance, low maintenance costs and protection against above and below grade pest infestation. PIP construction can be used with virtually any type of building.